A health-care worker prepares a dose of the Pfizer-BioNTech COVID-19 vaccine at a UHN COVID-19 vaccine clinic in Toronto, Thursday, Jan. 7, 2021. THE CANADIAN PRESS/Nathan Denette

A health-care worker prepares a dose of the Pfizer-BioNTech COVID-19 vaccine at a UHN COVID-19 vaccine clinic in Toronto, Thursday, Jan. 7, 2021. THE CANADIAN PRESS/Nathan Denette

From science to syringe: COVID-19 vaccines are miracles of science and supply chains

Single vaccine dose made up of more than 280 components, requires three manufacturing plants to produce

A single dose of Pfizer-BioNTech’s COVID-19 vaccine is barely enough to cover the average pinky nail but is made up of more than 280 components and requires at least three manufacturing plants to produce.

By the time that dose is injected, it has travelled to at least six different cities in four countries, across the Atlantic Ocean twice, and monitored by a 24-hour watchtower in Iceland every step of the way.

A marvel of both science and supply-chain heroics takes the vaccine from the factory floor to the arms of grateful patients all over the world.

“It’s really very complex,” said Germain Morin, Pfizer’s vice-president in charge of global supply chains for the company’s rare-disease medications and vaccines.

The messenger ribonucleic acid (mRNA) vaccines being made by Pfizer and its German partner BioNTech, as well as Moderna, are a novel technology that before COVID-19 had never been approved for widespread use in humans.

While DNA is the large and complex molecule that stores all of genetic coding that makes us who we are, RNA carries individual pieces of that code out into the body with the instructions on how to carry out the body’s work.

In the case of mRNA vaccines, they are carrying the genetic code for part of the SARS-CoV-2 virus, which teaches our bodies to mount a defence against the virus.

A year ago, the materials for these vaccines were being made for research purposes only, enough for maybe a few hundred doses at a time. Now Pfizer expects to pump out two billion doses by the end of this year.

It has made scaling up the manufacturing process a herculean feat, said Morin. There are 25 different suppliers involved, spanning 19 different countries. Some of them, said Morin, were making milligrams of liquid at the start. Then they were asked to make kilograms of it, and finally hundreds of kilograms.

The 475,000 doses Canada received last week began their lives before Christmas. Morin said it used to take four months to make a single dose of the vaccine, which is officially called BNT162b2. Morin said the process has recently been streamlined to half that time.

Every dose of the Pfizer-BioNTech vaccine is born in a Pfizer lab in Chesterfield, Mo., a suburb of St. Louis. That’s where small DNA molecules called plasmids are made with the beginnings of the code for the SARS-CoV-2 spike protein.

It takes about two weeks, followed by a quality assurance process. Every step of production has quality checks and rechecks, from the bags and boxes used to store and transport the vaccine components to the temperature in the lab and the protective clothing worn by any workers.

Then comes the first major chill, as the plasmids are put in bags and frozen to that famous ultralow temperature Pfizer’s product needs: -80C.

From Missouri, the plasmids are shipped to two labs, one a Pfizer facility in Andover, Mass., and another a BioNTech facility in Germany, where they are used to make the mRNA.

A single batch of mRNA takes about four days to make, in a high-tech process with numerous enzymes and chemicals. The mRNA is then frozen again and shipped off for finishing.

READ MORE: NDP, Liberals make free COVID-19 vaccine promise on B.C. election trail

In the U.S. that happens in Kalamazoo, Mich., and for Canada’s doses, currently made in Europe, they go to Puurs, Belgium, Pfizer’s biggest plant in the world.

Messenger RNA is not a very stable product and will disintegrate quickly if not protected, so every bit of mRNA is encased in a tiny amount of fat called a lipid nanoparticle.

“Imagine a very, very small egg, so a very small eggshell of lipids that would protect the mRNA,” said Morin. “This is part of the magic of making this vaccine as well.”

Over the course of three or four more days the mRNA gets its lipid coating, and is filled into vials containing enough vaccine for six doses. The vials are then packed into boxes, and immediately put into “those famous freezers” which turn the lipid-coated mRNA molecules into mini blocks of ultracold ice.

“This was, by the way, one of the challenges,” said Morin. “You can imagine that those freezers are not very common in the world. Laboratories buying them would typically buy them one or two at a time. We went to the suppliers and the first time we’ve asked for 650 of them in one shot, and then we went for more after that.”

The vials stay in those freezers for two to three weeks, while every lot is tested with more than 40 different quality-control measures.

Then come the thermal shipping boxes Pfizer and BioNTech developed for this vaccine. Each vial is packed into a tray about the size of a pizza box with 195 vials total. Five trays are packaged together into the special box, which is filled with dry ice, and sealed.

Every box contains a tracking unit to know its location and internal temperature at all times. A control site in Iceland monitors the boxes, which are all uniquely labelled. If any box records a problem between Belgium and the delivery site, it will be investigated and most likely discarded.

Morin said at first there were many concerns about the complexity of the freezer requirements but the supply chain has been so successful that only one per cent of the product around the world has been lost because of temperature concerns.

Pfizer contracted with UPS to deliver the boxes. Those are picked up by UPS in Belgium, and sent through Germany and Kentucky on their way to Canada.

UPS delivers the batches to dozens of delivery sites in each province, where provincial health officials take over possession and prepare to inject them into arms.

Moderna hasn’t released as many details about its manufacturing process, but has said the vaccine is largely produced for Canada in Switzerland, sent to Spain to be mixed with a diluent and filled into vials, and then shipped to a warehouse in Belgium.

Canada has hired FedEx and Innomar Strategies to manage the shipping and distribution of Moderna’s and all other vaccines except Pfizer-BioNTech’s.

Guy Payette, the president of Innomar, said they too use specially designed boxes. Moderna’s vaccine doesn’t have to be frozen as deeply but does have to be kept at about -20C.

The other vaccines Canada is likely to get will mostly need to be kept at about 6 C.

Payette said each box is also labelled and tracked with a GPS and thermal sensor. The shipments arrive at Innomar’s warehouse, where workers repackage them to match the quantities being sent to each province.

He said except for one spot in northern British Columbia, the trackers have worked beautifully. Where they did not, due to the altitude, boxes are equipped with a second device with data that can be downloaded later.

He said so far, the temperature has been fine and all products delivered successfully.

Those involved in the vaccine process have expressed awe at the speed with which everything turned around. Moderna’s vaccine was in clinical trials less than two months after the SARS-CoV-2 virus was fully sequenced.

Pfizer and BioNTech signed a partnership agreement in March 2020, and 266 days later the vaccine was approved in the United Kingdom. More than 50 countries have since followed suit and more than 100 million doses of Pfizer-BioNTech’s vaccine have now been distributed.

It’s a pace of development the company has never seen in its 173-year history.

“Oh, no, no, no, no, no, no, not even close,” said Morin.

He said most products take three to five years to get this far.

“We’re very proud,” he said. “Every new market that we launch is a celebration.”

He said when the first Canadian was vaccinated on Dec. 14, “I had goosebumps.”

Coronavirusvaccines

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Four members with Divers for Cleaner Lakes and Oceans were out at Cultus Lake on March 28 and 29 hauling trash out of the waters. (Henry Wang)
PHOTOS: Out-of-town divers remove 100s of pounds of trash from Cultus Lake

Members of Divers for Cleaner Lakes and Oceans hauled out 470 pounds of trash over two days

Photo courtesy of Abbotsford Police Department.
‘Vehicle Maintenance 101 for Teens’ to be hosted by Abbotsford Police traffic officers

Virtual meetups with Q&A period held on April 23, May 11, May 25

Stock photo from Unsplash.com
Free online workshops on ‘advance care planning’ hosted in Abbotsford

3 sessions hosted by Abbotsford Hospice Society and Association for Healthy Aging

People stroll through rows of tulips in bloom during the Tulips of the Valley Festival on May 2, 2017. The colourful spring event, now called Chilliwack Tulips, opens on Sunday, April 11, 2021. (Jenna Hauck/ Chilliwack Progress file)
Chilliwack tulip attraction open this weekend after being closed last year due to COVID-19

More than 6.5 million bulbs in all at this year’s colourful Chilliwack Tulips event

The new American Eagle location at Highstreet Shopping Centre is set to open up this summer. (John Morrow/Abbotsford News)
Abbotsford American Eagle store opening at Highstreet Shopping Centre

Sevenoaks Shopping Centre location closing on April 18, new store opening in summer

B.C. Health Minister Adrian Dix and Premier John Horgan describe vaccine rollout at the legislature, March 29, 2021. (B.C. government)
1,262 more COVID-19 infections in B.C. Friday, 9,574 active cases

Province’s mass vaccination reaches one million people

Emergency crews on scene after a small plane crashed in a grassy area on the northeast side of Boundary Bay Airport Saturday morning (April 10). A freelancer said the plane caught fire and one person was transported to hospital by BC Emergency Health Services. (Photo: Shane MacKichan)
1 taken to hospital after plane crash at Metro Vancouver airport

Plane appears to have suffered ‘significant’ damage, says freelancer

A vehicle that was driven through the wall of a parkade at Uptown Shopping Centre and into the nearby Walmart on April 9 was removed through another hole in the wall later that night. (Photo via Saanich Police Department and Ayush Kakkar)
Vehicle launched into B.C. Walmart removed following rescue of trapped workers

Crews cut new hole in parkade wall to remove vehicle safely

As of Saturday, April 10, people born in 1961 are the latest to be eligible for a COVID-19 vaccine. (Black Press files)
B.C. residents age 60+ can now register to get their COVID-19 vaccine

Vaccine registration is now open to people born in 1961 or earlier

A new saline gargle test, made in B.C., will soon be replacing COVID-19 nasal swab tests for kids. (PHSA screenshot)
Take-home COVID-19 tests available for some B.C. students who fall ill at school

BC Children’s Hospital plans to provide 1,200 kits to Vancouver district schools this April

Ruming Jiang and his dog Chiu Chiu are doing fine following a brush with hypothermia that saw several people work together to get them out of the Fraser River near Langley’s Derby Reach Park on March 25, 2021 (Special to the Advance Times)
Man finds men who rescued him from drowning in B.C.’s Fraser River

A grateful Ruming Jiang says he will thank them again, this time in person when the pandemic ends

The 10-part Netflix series Maid, which is being exclusively shot in Greater Victoria, was filming near Prospect Lake in Saanich last month. (Photo courtesy Fred Haynes)
Province announces $150,000 towards film studio, fulfilling B.C. NDP promise

Investment to fund movie studio feasibility study at Camosun College

Tyson Ginter, 7, is proud of his latest Hot Wheels he recently received by Quesnel RCMP Const. Matt Joyce. (Photo submitted)
B.C. Mountie handing out toy cars to light up children’s faces

‘A lot of times it will be the only interaction they have with the police,’ says Const. Matt Joyce

Cannabis bought in British Columbia (Ashley Wadhwani/Black Press Media)
Is it time to start thinking about greener ways to package cannabis?

Packaging suppliers are still figuring eco-friendly and affordable packaging options that fit the mandates of Cannabis Regulations

Most Read